| Our 100 series of
100% solids and water-based epoxies and 200 series of epoxy novolac products
offer you the most complete range of epoxy systems available.
From thin membranes to ¼” trowel down
materials, Duraguard epoxies offer excellent bonding capabilities, flexibility
and durability. Surfaces are easy to install, resist many acids, alkalis and
solvents.
Duraguard epoxies also clean easily without
the loss of hardness. Our Epoxy and
Epoxy Novolac coatings and products are available as a Primer, Body Coat and Top Coat.
|
 |
|
 |
| |
|
Primer |
| Duraguard™ 100 |
|
Duraguard™ 100 WB |
|
|
|
| Duraguard 100 is a two
component, low modulus, 100% solids, moisture tolerant epoxy primer, sealer and
injection resin. Additionally, it is a bonding agent, coating for reinforcing
steel, or when mixed with aggregate, a repair mortar for horizontal repairs.
Common uses include
sealer for interior, horizontal concrete surfaces. Primes concrete surfaces
specified to receive epoxy, novolac or urethane coatings and toppings.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
CSI Specification |
|
Duraguard 100 WB is a
two-component, V.O.C. compliant epoxy. It is water based and can be used as a
primer for epoxy or urethane topcoats. Two coats of Duraguard 100 WB alone may
be used as a light duty floor coating and sealer. Common
uses include interior floors and
walls; primer or sealer. Dry or damp concrete surfaces. Primer for
Duraguard 310 CRU or other polymer coatings. Foot
traffic, commercial and light duty industrial. Locker rooms, cafeterias,
schools, lavatories. Retail outlets, malls, busy public buildings, airline hangars, service
stations and more.
Technical Data Sheet
MSDS - Part A
MSDS - Part B Pigmented
MSDS - Part B Clear
CSI Specification |
| |
|
Body Coat |
| Durastone™ 140 |
|
Duraflow™ 150 |
|
|
|
| Durastone 140 is a three component, trowel applied epoxy
topping consisting of a two part, 100% solids epoxy and a precisely blended
aggregate. Common uses include resurfacing of floors subject to
high impact or heavy abrasion such as heavy traffic areas in industrial
production plants or high volume warehouse facilities.
Technical Data Sheet |
|
Duraflow 150 is a three
component, self-leveling, epoxy topping composed of a two part, 100% solids
epoxy and blended aggregate. All components are precisely measured and packaged
for accurate on-site mixing and use. Common uses include
new or old, interior, horizontal concrete surfaces. Industrial, commercial,
municipal and warehousing applications. Resurfacing spalled, pitted or
deteriorated concrete floors. Electronic and vehicular assembly plants,
fabrication and packaging facilities. Retail outlets, malls, kitchens, entry
ways, showrooms, hangars and more.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
MSDS - Part C
MSDS - Tint
CSI Specification |
| |
| Duraflow™ 250 |
|
|
|
|
|
|
Duraflow 250 is a two
component, self-leveling, 100% solids epoxy novolac topping. It is a highly
chemical resistant coating that is applied at 1/8 in./32 mm.
Common uses include on
concrete floors subject to heavy uses and chemical attack including; battery
storage facilities, chemical processing areas and storage, fertilizer plants,
aviation or automotive maintenance facilities, paper mills, electronic and
vehicular assembly plants, fabrication and packaging facilities.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
CSI Specification |
|
|
| |
|
Top Coat |
| Duraguard™ 120 |
|
Duraguard™ 220 |
|
|
|
| Duraguard 120 is a two
component, 100% solids, high build epoxy coating system designed for application
at 15-20 mils. Duraguard 120 is a topcoat over a primer in areas subject to
moderate wear and/or moderate chemical attack. Duraguard 120 is available in
many colors to provide a decorative easy to maintain floor in commercial
establishments. It is also available in a non-sag formulation (Duraguard 120V)
for application on vertical surfaces.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
CSI Specification |
|
Duraguard 220 is a two
component, 100% solids, chemical resistant, epoxy novolac coating.
Common uses include
concrete floors subjected to chemical spills, fumes or immersion in many organic
and inorganic acids. Industrial, commercial, manufacturing, petrochemical
operations. Chemical storage and warehouse facilities, automotive and aviation
repair areas, battery storage rooms, mechanical rooms, paper mills. Hospitals,
metal plating shops, canning and bottling plants and airline hangars.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
CSI Specification |
|
