| Our 100 series of
100% solids and water-based epoxies and 200 series of epoxy novalac products
offer you the most complete range of epoxy systems available.
From thin membranes to ¼” trowel down
materials, Duraguard epoxies offer excellent bonding capabilities, flexibility
and durability. Surfaces are easy to install, resist many acids, alkalis and
solvents.
Duraguard epoxies also clean easily without
the loss of hardness. Our Epoxy and
Epoxy Novalac products are available as a Primer, Body Coat and Top Coat. |
 |
|
 |
| |
|
Primer |
| Duraguard™ 100 |
|
Duraguard™ 100 WB |
|
|
|
| Duraguard 100 is a two
component, low modulus, 100% solids, moisture tolerant epoxy primer, sealer and
injection resin. Additionally, it is a bonding agent, coating for reinforcing
steel, or when mixed with aggregate, a repair mortar for horizontal repairs.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
CSI Specification
|
|
Duraguard 100 WB is a
two-component, V.O.C. compliant epoxy. It is water based and can be used as a
primer for epoxy or urethane topcoats. Two coats of Duraguard 100 WB alone may
be used as a light duty floor coating.
Technical Data Sheet
MSDS - Part A
MSDS - Part B Pigmented
MSDS - Part B Clear
CSI Specification |
| |
|
Body Coat |
| Durastone™ 140 |
|
Duraflow™ 150 |
|
|
|
| Durastone 140 is a three component, trowel applied epoxy
topping consisting of a two part, 100% solids epoxy and a precisely blended
aggregate. Common uses include resurfacing of floors subject to
high impact or heavy abrasion such as heavy traffic areas in industrial
production plants or high volume warehouse facilities.
Technical Data Sheet |
|
Duraflow 150 is a three
component, self-leveling, epoxy topping composed of a two part, 100% solids
epoxy and blended aggregate. All components are precisely measured and packaged
for accurate on-site mixing and use.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
MSDS - Part C
MSDS - Tint
CSI Specification |
| |
| Duraflow™ 250 |
|
|
|
|
|
|
Duraflow 250 is a two
component, self-leveling, 100% solids epoxy novalac topping. It is a highly
chemical resistant coating that is applied at 1/8 in./32 mm.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
CSI Specification |
|
|
| |
|
Top Coat |
| Duraguard™ 120 |
|
Duraguard™ 220 |
|
|
|
| Duraguard 120 is a two
component, 100% solids, high build epoxy coating system designed for application
at 15-20 mils.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
CSI Specification |
|
Duraguard 220 is a two
component, 100% solids, chemical resistant, epoxy novalac coating.
Technical Data Sheet
MSDS - Part A
MSDS - Part B
CSI Specification |
|
